- LED Lighting
- Optoelectronic
- Sensors
- Power Supply
- Electromechanics
- Signal Technology
- Memory & Storage
- Thermal Management
- Circuit Breaker
- Hi-Rel
- Diverse
|
PCIe - M.2 2280 SSD REX 1TB 3D-NAND TLC
FLEXXON’s REX M.2 2280 SSD 1TB has PCIe Gen4x4 interface, and is fully compliant with NVMe 1.3 industrial standard. It supports high performance and low power consumption.Suitable for embedded solution for new platform. - Advanced Flash Management: Static and Dynamic Wear Leveling, Bad Block Management, TRIM, SMART, Over-Provision, Firmware update - Power Management: Support APST, support ASPM, support L1.2 - End to end data path protection - Thermal throttling - Smart ECC - SmartRefresh - Drive log - Support TCG OPAL and TCG Pyrite - RoHS compliant |
Manufacturer: | Flexxon |
Productgroup: | M.2 SSDs |
Part Number: | FCSO001TBC-EE00 |
Series: | FCSO |
State: | 🟢 Active |
Note article Request article |
Series: | REX | ||
Form Factor: | M.2 2280 | ||
Memory Type: | 3D TLC | ||
Interface: | NVMe PCIe Gen4 x4 | ||
Capacity : | 1000 GB | ||
Write Performance : | 4400 MB/s | ||
Read Performance : | 5000 MB/s | ||
Operating Voltage : | 3.3 V | ||
MTBF: | 2000000 | ||
Shock Resistance: | 1500G/0.5ms | ||
Vibration Resistance: | 80Hz ~ 2000Hz/20G | ||
Industrie: | No | ||
Medical: | No | ||
Military: | No | ||
Power Loss Protection: | No | ||
Length: | 80 mm | ||
Width: | 22 mm | ||
Heigth: | 1.35 mm | ||
Min. operating temperature: | 0 °C | ||
Max. operating temperature: | 70 °C |
|
Hint: current revision of the supplier datasheet is applicable