- LED Lighting
- Optoelectronic
- Sensors
- Power Supply
- Electromechanics
- Signal Technology
- Memory & Storage
- Thermal Management
- Circuit Breaker
- Hi-Rel
- Diverse
|
SD Card FxPro I SLC 512MB Diamond
The Secure Digital (SD) memory card version 3.0 SLC 512MB Diamond is fully compliant with the specification released by SD Card Association. It can alternate communication protocol between the SD mode and SPI mode.FLEXXON FxPro I SD card provides high performance, good reliability, wide compatibility and industrial operating temperature flexibility. - Advanced Flash Management: Static and Dynamic Wear Leveling; Bad Block Management; SMART Function; Auto-Read Refresh - Support SD 3.0 - Support SD SPI mode - Designed for read-only and read/write cards - Copyrights Protection Mechanism - CPRM (Content Protection for Recordable Media) of SD Card supported. (Optional) - Card removal during read operation will never harm the content - Password Protection of cards (option) - Built-in write protection features (permanent and temporary) - Support Power Loss Protection Algorithm (optional) - +4KV/-4KV ESD protection in contact pads - RoHS Compliant |
Manufacturer: | Flexxon |
Productgroup: | SD Cards |
Part Number: | FDMS512MSE-1001 |
Series: | FDMS |
State: | 🟢 Active |
Note article Request article |
Series: | FxPro I | ||
Form Factor: | SD | ||
Memory Type: | SLC | ||
Interface: | SD 3.0 | ||
Capacity: | 512MB | ||
Write Performance : | 20 MB/s | ||
Read Performance : | 20 MB/s | ||
Operating Voltage : | 2,7 - 3,6 V | ||
MTBF: | 3000000 | ||
Shock Resistance: | 1500G/0.5ms | ||
Vibration Resistance: | 80Hz ~ 2000Hz/20G | ||
Industrie: | Yes | ||
Medical: | No | ||
Power Loss Protection: | No | ||
PINs: | 8 | ||
Length: | 32 mm | ||
Width: | 24 mm | ||
Heigth: | 2.1 mm | ||
Min. operating temperature: | -40 °C | ||
Max. operating temperature: | 85 °C |
|
Hint: current revision of the supplier datasheet is applicable