- LED Lighting
- Optoelectronic
- Sensors
- Power Supply
- Electromechanics
- Signal Technology
- Memory & Storage
- Thermal Management
- Circuit Breaker
- Hi-Rel
- Diverse
|
SD Card FxPro I SLC 512MB Gold
FLEXXON's Memory Card - SD FxPro I SLC 512MB Gold is fully compliant with the specification released by SD Card Association. It can alternate communication protocol between the SD mode and SPI mode.FLEXXON FxPro I SD card provides high performance, good reliability, wide compatibility and industrial operating temperature flexibility. - Advanced Flash Management: Static and Dynamic Wear Leveling; Bad Block Management; SMART Function; Auto-Read Refresh - Support SD 3.0 - Support SD SPI mode - Designed for read-only and read/write cards - Copyrights Protection Mechanism - CPRM (Content Protection for Recordable Media) of SD Card supported. (Optional) - Card removal during read operation will never harm the content - Password Protection of cards (option) - Built-in write protection features (permanent and temporary) - Support Power Loss Protection Algorithm (optional) - +4KV/-4KV ESD protection in contact pads - RoHS Compliant |
Manufacturer: | Flexxon |
Productgroup: | SD Cards |
Part Number: | FDMS512MSG-1001 |
Series: | FDMS |
State: | 🟢 Active |
Note article Request article |
Series: | FxPro I | ||
Form Factor: | SD | ||
Memory Type: | SLC | ||
Interface: | SD 3.0 | ||
Capacity: | 512MB | ||
Write Performance : | 20 MB/s | ||
Read Performance : | 20 MB/s | ||
Operating Voltage : | 2,7 - 3,6 V | ||
MTBF: | 3000000 | ||
Shock Resistance: | 1500G/0.5ms | ||
Vibration Resistance: | 80Hz ~ 2000Hz/20G | ||
Industrie: | Yes | ||
Medical: | No | ||
Power Loss Protection: | No | ||
PINs: | 8 | ||
Length: | 32 mm | ||
Width: | 24 mm | ||
Heigth: | 2.1 mm | ||
Min. operating temperature: | -25 °C | ||
Max. operating temperature: | 85 °C |
|
Hint: current revision of the supplier datasheet is applicable