- LED Lighting
- Optoelectronic
- Sensors
- Power Supply
- Electromechanics
- Signal Technology
- Memory & Storage
- Thermal Management
- Circuit Breaker
- Hi-Rel
- Diverse
|
Optocoupler, Phototransistor-Output, 6-Pin
H11F1 optically coupled isolator with an infrared light emitting diode and a NPN silicon photo transistor in a standard 6 pin dual in line plastic package. The detector is electrically isolated from the input and performs like an ideal isolated FET designed for distortion-free control of low level ac and dc analog signals.Features • UL recognised, File No. E91231 As a remote variable resistor: • ≤100Ω to ≥300MΩ • ≥ 99.9% Linearity • ≤15 pF Shunt Capacitance • ≥100GΩ I/O Isolation Resistance As an Analog Signal Switch: • Extremely low Offset Voltage • 60V pk-pk Signal Capability • No Charge Injection or Latchup • ton, toff ≤15μs |
|
Manufacturer: | Isocom Components | |
Productgroup: | Optocouplers | |
Part Number: | H11F1 | |
Datasheet: | Open datasheet | |
State: | This article has been discontinued by the manufacturer. |
Note article Request article |
Output Type: | Phototransistor | ||
Channels: | 1 | ||
PINs: | 6 | ||
Isolation Voltage : | 5300 Vrms | ||
Turn On Time : | 25 µs | ||
Turn Off Time : | 25 µs | ||
Input Current Type: | DC | ||
Forward Current max. : | 60 mA | ||
Hi-Rel: | No | ||
High Speed: | No | ||
High Voltage: | No | ||
Length: | 7.62 mm | ||
Width: | 8.3 mm | ||
Heigth: | 5.1 mm | ||
Min. operating temperature: | -55 °C | ||
Max. operating temperature: | 100 °C | ||
Chassis: | DIP |
|
Hint: current revision of the supplier datasheet is applicable