- LED Lighting
- Optoelectronic
- Sensors
- Power Supply
- Electromechanics
- Signal Technology
- Memory & Storage
- Thermal Management
- Circuit Breaker
- Hi-Rel
- Diverse
|
Optocoupler, AC-In, Phototransistor-Output, 4-Pin
The SFH620A-3XSM is a optically coupled isolator consist of inverse parallel infrared light emitting diodes and a NPN silicon photo transistor.Features • Surface Mount, 4-pin • Low input current ±1mA IF • High Current Transfer Ratios (40-320% at ±10mA, 13% min at ±1mA) • HighIsolationVoltage (5.3kVrms, 7.5kVpk) • High BVCEO (70V min) • AC or polarity insensitive input • All electrical parameters 100% tested • Custom electrical selections available • UL recognised, File No. E91231 Package Code "EE" • VDE 0884 • Approved to CECC 00802 |
|
Manufacturer: | Isocom Components | |
Productgroup: | Optocouplers | |
Part Number: | SFH620A-3XSM | |
Datasheet: | Open datasheet | |
State: | 🟢 Active |
Note article Request article |
Output Type: | Phototransistor | ||
Channels: | 1 | ||
PINs: | 4 | ||
Isolation Voltage : | 5300 Vrms | ||
Rise Time : | 4 µs | ||
Fall Time : | 3 µs | ||
CTR Min : | 100 % | ||
CTR Max : | 320 % | ||
Input Current Type: | AC | ||
Forward Current max. : | 50 mA | ||
Hi-Rel: | No | ||
High Speed: | No | ||
High Voltage: | No | ||
Length: | 4.58 mm | ||
Width: | 10.16 mm | ||
Heigth: | 3.85 mm | ||
Min. operating temperature: | -30 °C | ||
Max. operating temperature: | 100 °C | ||
Chassis: | SMD |
|
Hint: current revision of the supplier datasheet is applicable