- LED Lighting
- Optoelectronic
- Sensors
- Power Supply
- Electromechanics
- Signal Technology
- Memory & Storage
- Thermal Management
- Circuit Breaker
- Hi-Rel
- Diverse
|
Optocoupler, Phototransistor-Output, 15kV
The OPI110C high voltage optoisolator contains an 890 nm infrared Light Emitting Diode (LED) and a NPN silicon Photosensor. The device is sealed in a precast opaque housing with a optically transmissive path between the LED and the photosensor.Features: - 15 kV electrical isolation - Low‐cost plastic housing - UL recognized File No. E58730 |
|
Manufacturer: | TT Electronics | |
Brand: | OPTEK Technology | |
Productgroup: | Optocouplers | |
Part Number: | OPI110C | |
Series: | OPI110 | |
Datasheet: | Open datasheet | |
State: | 🟢 Active |
Note article Request article |
Output Type: | Phototransistor | ||
Channels: | 1 | ||
PINs: | 4 | ||
Isolation Voltage : | 15000 Vrms | ||
CTR Min : | 100 % | ||
Input Current Type: | DC | ||
Forward Current typ. : | 10 mA | ||
Forward Current max. : | 40 mA | ||
Lead Length : | 12.7 mm | ||
Hi-Rel: | No | ||
High Speed: | No | ||
High Voltage: | Yes | ||
Length: | 13.97 mm | ||
Width: | 5.72 mm | ||
Heigth: | 5.72 mm | ||
Min. operating temperature: | -40 °C | ||
Max. operating temperature: | 85 °C | ||
Chassis: | Axial |
|
Hint: current revision of the supplier datasheet is applicable