- LED Lighting
- Optoelectronic
- Sensors
- Power Supply
- Electromechanics
- Signal Technology
- Memory & Storage
- Thermal Management
- Circuit Breaker
- Hi-Rel
- Diverse
|
Optocoupler, Phototransistor-Output
The OPI1270-026 high voltage optocoupler consist of a visible Red LED and a Phototransistor sensor, which are housed in separate opaque molded plastic housings and coupled by plastic fiber optic cable.Features: - Opaque plastic housings - High noise immunity - Visible Red LED with Phototransistor Output - 0.05” (1.27 mm) lead spacing |
|
Manufacturer: | TT Electronics | |
Brand: | OPTEK Technology | |
Productgroup: | Optocouplers | |
Part Number: | OPI1270-026 | |
Series: | OPI1270 | |
Datasheet: | Open datasheet | |
State: | 🟢 Active |
Note article Request article |
Output Type: | Phototransistor | ||
Channels: | 1 | ||
PINs: | 4 | ||
Isolation Voltage : | 10200 Vrms | ||
Input Current Type: | DC | ||
Forward Current typ. : | 10 mA | ||
Forward Current max. : | 43.5 mA | ||
Hi-Rel: | No | ||
High Speed: | No | ||
High Voltage: | Yes | ||
Length: | 40 mm | ||
Width: | 9.53 mm | ||
Heigth: | 9.53 mm | ||
Min. operating temperature: | -20 °C | ||
Max. operating temperature: | 75 °C | ||
Chassis: | Axial |
|
Hint: current revision of the supplier datasheet is applicable