- LED Lighting
- Optoelectronic
- Sensors
- Power Supply
- Electromechanics
- Signal Technology
- Memory & Storage
- Thermal Management
- Circuit Breaker
- Hi-Rel
- Diverse
|
Optocoupler, Logic-Output (Inv. Open Coll.), 15kV
The OPI128 high voltage optoisoltator consist of a 890 nm gallium arsenide infrared emitting diode coupled to a monolithic integrated circuit. This circuit incorporates a photodiode, a linear amplifier and a Schmitt trigger on a single silicon chip.Features: - 15 kV dc input‐to‐output isolation voltage - Direct TTL/STTL interface - High noise immunity - Data rates to 250 KBit/s - Hermetically sealed - TX‐TXV process available - UL File No. E 58730* |
|
Manufacturer: | TT Electronics | |
Brand: | OPTEK Technology | |
Productgroup: | Optocouplers | |
Part Number: | OPI128 | |
Datasheet: | Open datasheet | |
State: | 🟢 Active |
Note article Request article |
Output Type: | Logic | ||
Channels: | 1 | ||
PINs: | 5 | ||
Isolation Voltage : | 15000 Vrms | ||
Rise Time : | 100 µs | ||
Fall Time : | 100 µs | ||
Input Current Type: | DC | ||
Forward Current typ. : | 7.5 mA | ||
Forward Current max. : | 25 mA | ||
Hi-Rel: | No | ||
High Speed: | No | ||
High Voltage: | Yes | ||
Length: | 19.05 mm | ||
Width: | 7.87 mm | ||
Heigth: | 7.87 mm | ||
Min. operating temperature: | -55 °C | ||
Max. operating temperature: | 100 °C | ||
Chassis: | Axial |
|
Hint: current revision of the supplier datasheet is applicable