☎  +49 9135 73666 65
Merkliste Klammer auf0Klammer zu
Deutsche Version
Mobile Menu
Articles added

2Mbps High Speed High Voltage Optocoupler OPI1268

2Mbps High Speed High Voltage Optocoupler OPI1268 Optek Technology presents the High Speed High Voltage Optocoupler OPI1268S with an input to output isolation of 20KVDC.

These high-voltage optocouplers are used to isolate electrical "spikes" of different but interconnected circuits, especially for protection against direct contact with electrical voltages.

Signals in power electronics can be transmitted quickly and safely with the OPI1268 high-voltage coupler. UL certified for ATEX Optoisolator / ICEex applications. Specially designed for harsh and explosion-proof environments.

With a data transfer rate of 2Mbps and a typical signal propagation time (tPHL-tPLH) of ≤ 50 ns, the developer has a high transmission speed at his disposal. The circuit is temperature, current and voltage compensated and is ideally suited for DC and AC isolation between input and output. The output provides a TTL compatible signal. Even "hard" applications are possible due to the specified operating temperature range from -40°C to +100°C.

Immunity to transient overvoltages [dv/dt] is specified with 30kV/µs. With a total length of 28mm, an outstanding air/creepage distance of 24mm is achieved.